Good morning. So I have a minor issue that causes a large amount of irritation and frustration as I just want it to do what I’m asking it to!! So basically I have hue bridge pro and enough lights in the hall and the kitchen to run the motion aware feature. I want my lights in those areas to come on using dimmed scene at 16:30 till 1am which I’ve done in the automation tab. I’ve then set up a motion aware time slot for 16:30 till 1am that if I enter those areas my lights in the kitchen and hall will turn from dimmed to the bright scene which I have successfully set up on the motion aware section. So my issue is that in the automation setting I can change the scene brightness to whatever I like for example 100% but if try to pick a scene when setting up the motion aware it allows me to adjust the brightness to 100% in the scene brightness but for the life it me won’t save and the save option is greyed out. The only thing I can do is exit out and then It stays at about 50%. Not sure if this is a glitch between the automation tab and motion aware tab but surly it’s just adjusting the brightness. It’s let everything else save. Please if someone could help!!!